We've updated our
Privacy Policy effective December 15. Please read our updated Privacy Policy and tap

Study Guides > College Algebra CoRequisite Course

Plotting Points on the Coordinate Plane

Learning Outcomes

  • Define the components of the Cartesian coordinate system.
  • Plot points on the Cartesian coordinate plane.
An old story describes how seventeenth-century philosopher/mathematician René Descartes invented the system that has become the foundation of algebra while sick in bed. According to the story, Descartes was staring at a fly crawling on the ceiling when he realized that he could describe the fly’s location in relation to the perpendicular lines formed by the adjacent walls of his room. He viewed the perpendicular lines as horizontal and vertical axes. Further, by dividing each axis into equal unit lengths, Descartes saw that it was possible to locate any object in a two-dimensional plane using just two numbers—the displacement from the horizontal axis and the displacement from the vertical axis. While there is evidence that ideas similar to Descartes’ grid system existed centuries earlier, it was Descartes who introduced the components that comprise the Cartesian coordinate system, a grid system having perpendicular axes. Descartes named the horizontal axis the x-axis and the vertical axis the y-axis. The Cartesian coordinate system, also called the rectangular coordinate system, is based on a two-dimensional plane consisting of the x-axis and the y-axis. Perpendicular to each other, the axes divide the plane into four sections. Each section is called a quadrant; the quadrants are numbered counterclockwise as shown in the figure below.
This is an image of an x, y plane with the axes labeled. The upper right section is labeled: Quadrant I. The upper left section is labeled: Quadrant II. The lower left section is labeled: Quadrant III. The lower right section is labeled: Quadrant IV. The Cartesian coordinate system with all four quadrants labeled.

Try It

[ohm_question]92752[/ohm_question]
The center of the plane is the point at which the two axes cross. It is known as the origin or point (0,0)\left(0,0\right). From the origin, each axis is further divided into equal units: increasing, positive numbers to the right on the x-axis and up the y-axis; decreasing, negative numbers to the left on the x-axis and down the y-axis. The axes extend to positive and negative infinity as shown by the arrowheads in the figure below. This is an image of an x, y coordinate plane. The x and y axis range from negative 5 to 5. Each point in the plane is identified by its x-coordinate, or horizontal displacement from the origin, and its y-coordinate, or vertical displacement from the origin. Together we write them as an ordered pair indicating the combined distance from the origin in the form (x,y)\left(x,y\right). An ordered pair is also known as a coordinate pair because it consists of x and y-coordinates. For example, we can represent the point (3,−1)\left(3,-1\right) in the plane by moving three units to the right of the origin in the horizontal direction and one unit down in the vertical direction.
This is an image of an x, y coordinate plane. The x and y axis range from negative 5 to 5. The point (3, -1) is labeled. An arrow extends rightward from the origin 3 units and another arrow extends downward one unit from the end of that arrow to the point. An illustration of how to plot the point (3,-1).
When dividing the axes into equally spaced increments, note that the x-axis may be considered separately from the y-axis. In other words, while the x-axis may be divided and labeled according to consecutive integers, the y-axis may be divided and labeled by increments of 2 or 10 or 100. In fact, the axes may represent other units such as years against the balance in a savings account or quantity against cost. Consider the rectangular coordinate system primarily as a method for showing the relationship between two quantities.

A General Note: Cartesian Coordinate System

A two-dimensional plane where the
  • x-axis is the horizontal axis
  • y-axis is the vertical axis
A point in the plane is defined as an ordered pair, (x,y)\left(x,y\right), such that x is determined by its horizontal distance from the origin and y is determined by its vertical distance from the origin.

Example: Plotting Points in a Rectangular Coordinate System

Plot the points (−2,4)\left(-2,4\right), (3,3)\left(3,3\right), and (0,−3)\left(0,-3\right) in the coordinate plane.

Answer: To plot the point (−2,4)\left(-2,4\right), begin at the origin. The x-coordinate is –2, so move two units to the left. The y-coordinate is 4, so then move four units up in the positive y direction. To plot the point (3,3)\left(3,3\right), begin again at the origin. The x-coordinate is 3, so move three units to the right. The y-coordinate is also 3, so move three units up in the positive y direction. To plot the point (0,−3)\left(0,-3\right), begin again at the origin. The x-coordinate is 0. This tells us not to move in either direction along the x-axis. The y-coordinate is –3, so move three units down in the negative y direction. This is an image of a graph on an x, y coordinate plane. The x and y axes range from negative 5 to 5. The points (-2, 4); (3, 3); and (0, -3) are labeled. Arrows extend from the origin to the points.

Analysis of the Solution

Note that when either coordinate is zero, the point must be on an axis. If the x-coordinate is zero, the point is on the y-axis. If the y-coordinate is zero, the point is on the x-axis.

Try It

[ohm_question]92753[/ohm_question]

Try it

You can use an online graphing calculator to practice plotting points on the Cartesian Coordinate plane. Watch the following short video to learn how! https://youtu.be/eS6kabG2omI?list=PLfM6zMGnbgOGLZc-_Yj3QVK3Vz_L4Cw59 Now try plotting the following points with an online graphing calculator. (4,0)(4,0) (−1,5)(-1,5) (0,−10)(0,-10) (2,7)(2,7) (3,−5)(3,-5) (−4,−7)(-4,-7)

Licenses & Attributions